Comfort IQ™ · Scored on what actually matters
TEMPUR-PEDIC® Tempur-Align® 2.0 Teal 10″ Medium Firm Memory Foam Mattress — Performance & Feel
Comfort IQ™ scores eight dimensions 0–10 from National Mattress's in-house testing + construction — the same scale on every model, so two beds compare on what actually matters. Results vary by body type, base, and room temperature.
The Tempur-Pedic Tempur-Align 2.0 10″ Medium Firm is the balanced all-rounder of the Align line, with no weak axis and four scores at 8.0 or higher across cooling, pressure relief, motion isolation, and edge. At a true medium 5 out of 10 it lands right in the alignment sweet spot that suits the widest range of sleepers, pairing the authentic slow-melting TEMPUR feel with class-leading motion isolation that keeps a partner's movement from ever reaching your side. Cooling, pressure relief, motion isolation, and edge support all clear 8.0, so back, side, and combination sleepers alike get clean spinal support and quiet, even comfort right to the edge of the bed. For couples who want one bed that simply works for both of them, this is the confident do-everything pick of the line.
Performance Scores
A well-rounded 8.5 overall: responsiveness and durability top out, cooling and pressure relief both land in the 8s, and even the lowest axis — spinal support — reads very good for a medium foam bed.
Responsiveness10.0
Slow, cradling TEMPUR melt — supportive and enveloping
Durability10.0
High-density TEMPUR over a dense core resists dishing for years
Edge Support8.7
Firm support foam holds the perimeter for an all-foam bed
Cooling8.2
Manages heat well for foam — comfortable in a cool room
Motion Isolation8.0
Dense TEMPUR stops a partner's movement rippling across
Pressure Relief8.0
Balanced cradle that lets shoulders and hips settle
Spinal Support7.7
Continuous dense core holds the body on one neutral plane
Off-Gassing 9.0 Brand 7.5 Sleep Trial 10.0 Value 5.7
In National Mattress's in-house Comfort IQ analysis, the Tempur-Align 2.0 Medium scores: Overall 8.5/10, Cooling 8.2/10, Pressure Relief 8.0/10, Motion Isolation 8.0/10, Edge Support 8.7/10, Responsiveness 10.0/10, Spinal Support 7.7/10, Durability 10.0/10.
Best For
Couples who want one bed that fits both the medium 5/10 feel sits in the alignment sweet spot — supportive for back sleepers, cushioning for side sleepers.
Light sleepers sharing a bed motion isolation scores 8.0 — the dense TEMPUR material absorbs a restless partner's movement before it ripples across.
Memory-foam fans a perfect 10.0 responsiveness reflects the classic slow, enveloping TEMPUR melt — the genuine article from the brand that invented it.
Sleepers who run warm but want foam cooling scores 8.2, managing heat better than most all-foam beds despite having no coils.
Buyers who want a bed built to last a perfect 10.0 durability score from high-density TEMPUR over a dense core that resists dishing.
Considerations
Runs warmer than a hybrid (cooling 8.2). It manages heat well for an all-foam bed, but with a solid TEMPUR core and no coil airflow channel, genuinely hot sleepers should weigh that against a coil bed.
Slow to reposition for heavy movers (responsiveness is the TEMPUR melt). The cradling foam is what fans love, but dedicated combination sleepers who change position constantly may prefer a livelier latex or coil surface.
How It Performs — The Measured Detail
Feel & Firmness · 5/10 Medium
The Tempur-Align 2.0 Medium is a true medium at 5 out of 10 — the balanced middle of the firmness range. The TEMPUR comfort layer melts and reshapes around you while the dense support core keeps the surface from over-sinking, giving a feel that is supportive and cushioning at once. It is the most broadly agreeable tuning in the line, which is why it suits the widest mix of sleepers.
Cooling 8.2
The Tempur-Align 2.0 Medium manages heat better than most all-foam beds, scoring 8.2. Peak surface temperature lands in the 30.3-33.1 °C range, the overnight rise measures 8.3-11.1 °C, and the surface settles to the 25.5-29.7 °C range by morning. The structural limit is honest: with a solid TEMPUR foam core and no coil layer, there is no internal airflow channel, and no dedicated cooling cover. Sleepers who run cold or keep a cool room will be comfortable; genuinely hot sleepers should weigh a hybrid.
Pressure Relief 8.0
At a true medium feel of 5 out of 10, this model sits in the comfortable middle for relieving pressure, scoring 8.0. Sinkage measures in the 1.62-2.64 inch range, enough to let the shoulders and hips settle without over-sinking. The TEMPUR comfort layer distributes body weight evenly across the surface, easing the pressure points that build at the shoulder and hip through the night. The result is a balanced cradle with noticeable contour — the kind of medium feel that suits a wide range of sleepers without the deep plush sink of a soft bed.
Motion Isolation 8.0
Motion isolation is a genuine strength, scoring 8.0. Roll-across acceleration measures in the 0.84-4.13 m/s² range with the disturbance settling in the 0.54-0.76 seconds range. This is what all-foam construction does best: the dense TEMPUR material absorbs a partner's movement on contact and stops it rippling across the surface, with no springs to carry energy sideways. If you share the bed with someone who tosses and turns or keeps a different schedule, this medium TEMPUR-Align is close to the gold standard for staying undisturbed.
Edge Support 8.7
Edge sinkage measures in the 4.32-6.38 inch range — more give than a coil-encased bed, since there is no coil or encasement reinforcing the sides. In practice, sitting on the edge to dress feels less firm than on a spring bed, and you will notice some give if you sleep right at the boundary. That said, the dense support foam keeps the perimeter usable enough to earn a high 8.7. For sleepers who stay toward the center this matters little; those who use the full edge should know it up front.
Responsiveness 10.0
This bed responds slowly and deliberately — the signature TEMPUR feel, and the reason it earns a perfect 10.0 on our scale. Total bounce travel measures in the 5.67-10.40 inch range with little rebound, and full recovery falls in the under 4.59 second window, so the surface melts under your body and returns to shape gradually instead of springing back. That slow, cradling response feels supportive and enveloping rather than bouncy. The trade-off is that it is harder to reposition on than a latex or coil bed, so heavy movers may prefer a livelier surface.
Off-Gassing 9.0
Off-gassing is minimal, scoring 9.0. The initial odor registers as low, and the off-gassing period clears in under 12 hours. The Tempur-Align is built on CertiPUR-US certified foams tested to strict low-VOC limits, and it ships flat in a plastic bag rather than tightly compressed, both of which keep break-in odor low from the start. Any faint scent of new foam clears within a day or so, so most owners can sleep on it comfortably the first night once it is unpackaged and the room is ventilated.
Sleep Position & Body Weight Fit
The medium 5/10 feel is the broadest-fitting tuning in the line — supportive enough for back and stomach sleepers, cushioning enough for the shoulder when side sleeping. Because support comes from one continuous slab of dense foam, it holds the whole body on a single consistent plane, which many sleepers with alignment concerns find reassuring. Average-weight sleepers across every position are the sweet spot; very heavy back sleepers who want maximum push-back may prefer the firm model.
At a Glance
Type · Foam Firmness · 5/10 Medium Height · 10″ Comfort layer · 1″ Fiberglass-free CertiPUR-US certified Made in · USA Trial · 365 nights Delivery · Free on orders over $199
Full construction, per-size dimensions and specs are in the product description above. View 365-night trial details.
Frequently Asked
Is the Tempur-Align 2.0 Medium good for both back and side sleepers?
Yes. At a true medium 5 out of 10 it sits in the alignment sweet spot — supportive enough for back and stomach sleepers, with enough cushioning for the shoulder when side sleeping. It is the broadest-fitting tuning in the Align line, which is why couples with different positions often land here.
Does the Tempur-Align 2.0 Medium sleep hot?
It manages heat better than most all-foam beds, scoring 8.2 for cooling, with peak surface temperature of 30.3-33.1 °C. But with a solid TEMPUR core and no coil airflow channel, it runs warmer than a hybrid, so a genuinely hot sleeper should factor that in.
Is the Tempur-Align 2.0 Medium good for couples?
Yes. It scores 8.0 for motion isolation. The dense TEMPUR material absorbs a partner's movement on contact — roll-across acceleration measures 0.84-4.13 m/s² — and with no springs there is nothing to carry that movement across to your side.
What does the Tempur-Align 2.0 Medium feel like?
It has the classic slow-melting TEMPUR feel, scoring a perfect 10.0 for responsiveness on our scale. The foam yields gradually under your body and reshapes slowly when you move — supportive and enveloping rather than bouncy, the genuine memory-foam character.
Can I try the Tempur-Align 2.0 Medium at home?
Yes. It comes with a 365-night sleep trial, especially valuable with memory foam since the body needs time to acclimate to the TEMPUR feel. Delivery is free on orders over $199, and if the medium feel is not your match you can return it for a refund or exchange.
